How to change the screen for Macbook Air
The screen of Macbook Air is broken/blurred, and it is necessary to replace it.
Here is a detailed explanation of how to repair a broken MacBook Air screen.
Follow the steps below to replace your MacBook Air screen with a new one. However, changing the screen requires disassembling the entire computer, which is a complex process. Please do not try it easily. You can ask us to help you solve it.
![](https://cdn.shopify.com/s/files/1/0765/0377/7558/files/49701aebf6a75f0ff417265a97324b18502c4c90.webp?v=1685590277)
Tools/raw materials
- A set of screwdrivers
- Crowbar
- Tweezers
Method/Step
- Disassembling the shell: Flip the Mac over with the bottom facing down, remove the ten screws from the bottom shell shown in the above image, and remove the shell.
- Power outage: Disconnect the battery from the motherboard.
- Remove the I/O board cable and remove the fan.
- Disconnect the speaker cable, microphone cable, camera cable, Bluetooth card, and remove the I/O board, then unplug the monitor data cable.
- Remove the 4 screw that secure the monitor, and remove the antenna cable.
- Turn on the display, place it vertically on the desktop, remove the remaining two screw, and remove the display.
- Install the new display screen in reverse order. After installation, turn on the computer and check if the display screen is displaying normally.
Here's an offer just for you: "HE9JRCGRSYB2", get 10% off your entire order, limited to one use per new customer
Leave a comment
All blog comments are checked prior to publishing